48
REAR SEAT COVER
See your authorized Honda dealer for removal
installation of the rear seat cover.
Installation:
1. Remove the seat(page 45).
2. Remove the mounting bolts (1) and grab
rails (2).
Install the mounting bolts(1).
3. Remove the mounting bolts (3) and cowl
plugs (4).
install the seat securely, then install the
rear seat cover (5). Set the right and left
mounting bolts (3) and tighten them
securely.
The grab rails must be installed in the upright
position when riding in tandem.
To Next Page
Loading...
