Need help?Do you have a question about the Honda 1995 Z50R and is the answer not in the manual?
General| Brand | Honda |
|---|---|
| Model | 1995 Z50R |
| Category | Motorcycle |
| Language | English |
Safety precautions for servicing and operating the motorcycle.
Scheduled maintenance intervals and tasks for the motorcycle.
Procedure for inspecting and adjusting valve clearance when cold.
Performing a cylinder compression test.
Steps for safely removing the carburetor.
Disassembling the carburetor's throttle valve and jet needle.
Disassembling the carburetor's float chamber, float valve, and jets.
Step-by-step procedure for removing the engine from the frame.
Steps for installing the engine back into the motorcycle frame.
Specifications for camshaft journals, lobe height, and valve guides.
Torque values for cylinder head and valve train components.
Steps for removing the cylinder head assembly.
Installing the cylinder head assembly onto the engine.
Specifications for cylinder bore, piston dimensions, and ring clearances.
Steps for removing the cylinder from the engine block.
Procedure for removing the piston and piston rings.
Installing the piston and rings into the cylinder.
Installing the cylinder onto the crankcase.
Diagnosing cam chain noise and excessive chain slack.
Procedure for separating the crankcase halves.
Disassembling the transmission gears and shafts.
Assembling the crankcase with transmission components.
Removal and disassembly of the front suspension forks.
Inspection and assembly/installation of rear shock absorbers.
Troubleshooting starting issues, weak spark, and engine performance.
Diagnosing and resolving engine starting difficulties.
Troubleshooting causes of reduced engine power.
Diagnosing poor engine performance at low RPM and idle.
Troubleshooting issues affecting high-speed engine performance.
Diagnosing and rectifying poor motorcycle handling.
Troubleshooting conditions of weak or no spark.
To Next Page