Honeywell Home CG511A1000 User Manual

User Manual of Product 1:
Honeywell Home RTH7460D1018/E 5-1-1 Day Programmable
Thermostat
User Manual of Product 2:
Honeywell Home CG511A1000 Medium Thermostat Cover
Guard with Inner Shelf to Prevent Tampering (Clear)

Honeywell Home CG511A1000 Specifications

General

Programmability	Non-programmable
Compatibility	Single Stage Heating and Cooling Systems
Display	Digital
Color	White
Power Source	Battery Powered (2 AA batteries)
Voltage	24V
Accuracy	+/- 1°F (+/- 0.5°C)
Type	Non-Programmable Thermostat

Summary

Installation Preparation

Included in Your Box

Lists all the components and accessories included in the thermostat packaging for installation.

Tools for Installation

Details the essential and optional tools required for successfully installing the thermostat.

Removing Your Old Thermostat

Power Off and System Check

Safety instructions to turn off power to the HVAC system and verify it is off before proceeding.

Disconnect Wiring and Faceplate

Steps for safely disconnecting wires and removing the old thermostat's faceplate.

Wire Identification and Jumper Removal

Guide to photographing wiring, removing jumpers, and recording wire colors for reference.

Final Wire Disconnection and Wall Plate Removal

Instructions to disconnect remaining wires and remove the old wall plate from the mounting surface.

Installing the RTH7400/RTH7500 Thermostat

Mounting Plate and Wire Routing

Steps for attaching the UWP mounting plate and routing wires through it.

Wall Anchors and R-Wire Configuration

Instructions for installing wall anchors and configuring the R-wire switch based on wiring.

Connecting Wires, Securing Unit, and Powering On

Steps to connect wires to terminals, mount the thermostat, and install batteries.

Initial Thermostat Setup

Set Date and Time

Guide to setting the current date, time, and choosing the clock format.

System Setup Options

Instructions for configuring system parameters via the System Setup menu options.

Thermostat Operation

System Modes and Fan Settings

Explains how to select system modes (Auto, Heat, Cool) and fan modes (Auto, On, Circ).

Programming Schedules

Creating and Adjusting Schedules

Steps to set up daily temperature schedules for Wake, Away, Home, and Sleep periods.

Schedule Overrides and Wiring

Schedule Overrides (Temporary/Permanent)

Instructions on how to temporarily or permanently hold a desired temperature setpoint.

Conventional System Wiring Guide

Detailed wiring instructions for conventional systems, including alternate configurations.

Heat Pump Wiring and Advanced Features

Heat Pump Wiring Instructions

Specific guidance for connecting heat pump systems, including alternate wiring methods.

Accessing the Advanced Menu

Steps to enter and navigate the advanced setup menu for further configuration.

Smart Response and Time Setting

Smart Response Technology Explanation

Description of the thermostat's learning capability to reach programmed temperatures on time.

Setting the Thermostat's Time

Procedure for adjusting the device's clock to the correct current time.

Date, Units, and Alerts

Setting the Date and Temperature Units

Instructions for setting the current date and choosing between Fahrenheit (F) or Celsius (C) units.

Alert Screen Interpretation

How to view and understand thermostat alerts, error codes, and reminders.

Troubleshooting Common Issues

Troubleshooting Guide

Solutions for common operational problems like blank display, system response, or fan issues.

Warranty Information

1-Year Limited Warranty Details

Explains the product's limited warranty coverage, terms, and limitations.

Thermostat Guards Overview

Introducing Thermostat Guards

General introduction to the protective thermostat guard accessories.

Thermostat Guard Models and Specifications

Details specific models (CG510A, CG511A, CG512A), their features, and specifications.