Honeywell Home RLV3150A1004 User Manual

USER GUIDE
33-00209EF-05
RLV3150
ELECTRONIC THERMOSTAT
APPLICATION
This thermostat is designed to control
an electric heating system such as a
baseboard heater, a convector or a fan-
forced heater.
The thermostat cannot be used with the
following:
• a resistive load under 2 A
• a resistive load over 12.5 A
• systems driven by a contactor or a
relay (inductive load)
• central heating systems
Supplied Parts
• One (1) thermostat
• Two (2) 6-32 mounting screws
• Two (2) solderless connectors
CONTROLS AND DISPLAY
Fig. 1.
Backlit Screen
Up button
Temperature
Heating intensity
indicator (the image
disappears when
heating is off)
Appears when the
setpoint is displayed
Appears when the
thermostat is configured
for a fan-forced heater
(see page 3)
The settings are locked
Down button

Honeywell Home RLV3150A1004 Specifications

General

Voltage	24V
Display	Digital
Battery Backup	No
Application	Residential
Programmability	Non-Programmable
Color	White
Backlight	No
Power Source	Hardwired
Temperature Range	40°F to 90°F (4°C to 32°C)
Stages	1
Weight	0.3 lbs
Type	Non-Programmable Thermostat

Summary

Application

Supplied Parts

Lists items included in the thermostat package: one thermostat, mounting screws, and connectors.

Controls and Display

Installation

Mount the Thermostat

Step-by-step instructions for physically attaching the thermostat to the wallplate.

Wiring

Connects the thermostat wires to the heating system (load) and power supply.

Configuration Settings

Fan-Forced Heater Setting

Configure the thermostat for fan-forced heaters to prevent premature motor burnout.

Temperature Display and Setting

Setup Menu

Troubleshooting

Specifications

1-Year Limited Warranty

Customer Assistance