Need help?Do you have a question about the Honeywell Home RTH8800WF and is the answer not in the manual?
General| Brand | Honeywell Home |
|---|---|
| Model | RTH8800WF |
| Category | Thermostat |
| Language | English |
Provides critical safety warnings for electrical hazards, equipment damage, mercury disposal, and electronic waste.
Instructs users to disconnect power at the breaker box or switch to ensure safety before installation.
Warns against using the thermostat with 120/240V systems and identifies thick black wires with wire nuts.
Advises taking a photo of the wiring, including terminal letters, for reference during the new installation.
Instructs users to record wire presence and color for specific terminals like R, Rh, and Rc.
Guides users to check and write down wire colors for terminals Y, Y2, G, C, A/L/A, O/B, W2/AUX, E, W, K.
Guides on disconnecting wires from terminals using a screwdriver and removing the old wall plate.
Instructions on pulling the UWP open, inserting wires, and ensuring proper wire exposure for terminal connection.
Explains setting the R-switch position and inserting R-wire(s) into the R or Rc terminals based on wiring.
Guides on connecting the remaining wires to their corresponding terminals on the UWP and verifying their security.
Instructs on mounting the UWP securely to the wall using provided screws and closing its door.
Instructs to touch 'START SETUP' on the thermostat to begin the app-guided configuration process.
Guides users to select 'Yes' on the 'USE APP' screen to proceed with the app-based setup.
Details downloading the Resideo app, finding the thermostat, and following on-screen instructions for configuration.
Explains using navigation buttons and 'Edit' to adjust setup options and confirm correct values.
To Next Page