Honeywell Home T10+ Pro - How to Find More Options; Installer Setup; Installer Test; Devices & Sensors

12
How to find more options
Installer options include
Installer Setup
• System type
• IAQ control (hum, dehum, vent) reminders
Installer Test
• Turn on heat, cool, or IAQ equipment
Devices & Sensors
• View, add, or remove RedLINK 3.0 indoor sensors
• View, add, or remove wireless outdoor sensor (T10+ model only)
• View information about EIM (T10+ model only)
• Identify wireless sensors
Thermostat Information
• MAC ID number
• IP address
• Date code
• Model number
• Build date
• Stat app
• Firmware version
• Stat app boot #
• Hardware
Dealer Information
Finding date code (pass code) for installer setup.
Open the Menu icon, and choose Thermostat Information. Write down date code.
1. Touch the menu button.
2. Scroll up and down for more options.
M38796
1 2
Installer Options