EasyManuals Logo

Honeywell Home T4 Pro Series User Manual

Honeywell Home T4 Pro Series
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
11
Batteries are optional (to provide backup
power) if your thermostat was wired to run on
AC power when installed. If your thermostat
was not wired to run on AC power, then
batteries are required.
Install fresh batteries immediately when the
low battery icon appears. The icon appears
about two months before the batteries are
depleted.
Even if the low battery icon does not appear,
you should replace batteries once a year, or
before leaving home for more than a month.
If batteries are inserted within two minutes, the
time and day will not have to be reset. All other
settings are permanently stored in memory,
and do not require battery power.
NOTE: When replacing batteries, alkaline
batteries are recommended.
Battery replacement
Insert fresh alkaline AA
batteries and reinstall
thermostat.
When the low battery
warning appears, press
gently to loosen the
thermostat and then
carefully pull it from the
wall mount.
M36010
M36114
MCR36116
Alerts
If there is an alert or reminder, the alert icon
appears on the Home screen.
Low Battery Warning
1 The batteries need to be replaced when
BATT, the alert icon , and the battery icon
are displayed on the Home screen.
2 When the battery power is very low, the
thermostat’s backlight is disabled to save
battery power.
3 When battery power is critically low, only
BATT, the alert icon , and the battery icon
are displayed.
M36531
M36530A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell Home T4 Pro Series and is the answer not in the manual?

Honeywell Home T4 Pro Series Specifications

General IconGeneral
DisplayDigital
ProgrammableYes
Wi-FiNo
BacklightYes
Fan ModesAuto, On
ModelT4 Pro
Power SourceBattery or Hardwired
Temperature Range40°F to 90°F
Terminal DesignationsR, C, W, Y, G
Operating ModesHeat, Cool, Off
Temperature Range (Cooling)50°F to 99°F
Programmability7-day programmable
Stages1 Heat/1 Cool

Related product manuals