EasyManuals Logo

Honeywell Home T6 Pro Smart Professional Install Guide

Honeywell Home T6 Pro Smart
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
19
Screen is blank Check circuit breaker and reset if necessary.
Make sure power switch at heating and cooling system is on.
Make sure furnace door is closed securely.
Screen is difficult
to read
Change screen brightness in thermostat Menu. Increase brightness intensity for
inactive backlight of the thermostat screen (max. is level 5).
Heating or
cooling system
does not respond
Touch Mode to set system to Heat. Make sure the temperature is set higher than
the Inside temperature.
Touch Mode to set system to Cool. Make sure the temperature is set lower than
the Inside temperature.
Check circuit breaker and reset if necessary.
Make sure power switch at heating & cooling system is on.
Make sure furnace door is closed securely.
Heat runs with
cooling
Verify there is not a wire attached to W for heat pump systems. See wiring on
pages 67.
Troubleshooting
Number Alert/Reminder Definition
164 Heat Pump Needs
Service
Heat pump needs service. Contact dealer to diagnose
and service heat pump.
168 WiFi Radio Error Wireless features are not available. Try removing the
thermostat from the wallplate or power cycle at breaker
for 1 minute. If the code is still shown, please contact
dealer to replace the thermostat.
170 Internal Memory Error The memory of the thermostat has encountered an
error. Please contact dealer for assistance.
171 Set the Date and Time Set the date and time on your thermostat. The date and
time are required for certain features to operate, like the
program schedule.
173 Thermostat
Temperature Sensor
Error
The sensor of the thermostat has encountered an error.
Please contact dealer to replace the Thermostat.
175 AC Power Resumed AC power resumed to thermostat after power loss.
177 Indoor Temperature
Sensor Error
Wired indoor temperature sensor is not connected
or there is a wiring short. Please contact dealer for
assistance.
178 Outdoor Temperature
Sensor Error
Wired outdoor temperature sensor is not connected
or there is a wiring short. Please contact dealer for
assistance.
Alerts and reminders are displayed via the alert symbol and alert number in the clock
area on the home screen. You can read more information about active alerts, snooze
or dismiss non-critical alerts in Menu/Alerts.
Alerts and reminders

Other manuals for Honeywell Home T6 Pro Smart

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell Home T6 Pro Smart and is the answer not in the manual?

Honeywell Home T6 Pro Smart Specifications

General IconGeneral
BrandHoneywell Home
ModelT6 Pro Smart
CategoryThermostat
LanguageEnglish

Related product manuals