9
Installer setup – using the thermostat
Setup using the thermostat
• After the thermostat has powered up,
touch START SETUP on the thermostat.
You’ll be asked if you want to perform
setup via app. Touch No.
• Touch or to toggle between
Installer Set Up (ISU) options.
• Touch Edit or touch text area, and
then touch or to edit default
setup option.
• Touch Done or touch text area to
confirm the setting or press Cancel.
• Touch or to continue to setup
another ISU option.
NOTES:
• To see a list of all setup parameters,
go to "Installer setup options (ISU) –
advanced menu" on page 12. The
thermostat displays the ISU name
and the ISU number.
• To finish setup and save your settings,
scroll to the Finish screen at the end of
the ISU list.
• Touch Select or touch text area to
save changes and exit, or touch to
return to initial setup screen.
Cancel
Done
Edit ISU
ISU #
ISU option blinking
Cancels ISU option
selection, go back
to view ISU
Arrow buttons used
to scroll through ISU
options
Saves selected ISU
option moves on to
the next ISU screen
Edit
View ISU
ISU #ISU name and
option (scrolling)
Arrow buttons used
to scroll through
ISUs
Select
No
Yes
Back
To Next Page
Loading...
Need help?
General
