Honeywell Home T6 Pro TH6220U2000 User Manual (English)

To Next Page

Package Includes:

• T6 Pro Thermostat

• UWP™ Mounting System

• Decorative Cover Plate

• Screws and Anchors

• 2 AA Batteries

• Thermostat Literature

T6 Pro

Programmable

Thermostat

Installation Instructions

–

TH6320U2008,

TH6220U2000,

TH6210U2001,

Read before installing

Optional Cover Plate installation

NOTE: If Optional Cover Plate is not

required, see “UWP Mounting System

installation” on next page.

Use the Optional Cover Plate when

you need to cover paint gap from old

thermostat.

There are different cover plates

depending on when the thermostat was

manufactured.

For the square cover plate:

1. Separate the Cover Plate from

Mounting Plate.

2. Mount the Mounting Plate on to the

wall using any of the 8 screw holes.

Insert and tighten mounting screws

supplied with Cover Plate Kit. Do not

overtighten. See Figure 2. Make sure

the Mounting Plate is level.

3. Attach the UWP by hanging it on the

top hook of the Mounting Plate and

then snapping the bottom of the UWP

in place. See Figure 3.

4. Snap the Cover Plate onto the

Mounting Plate. See Figure 4.

Use supplied

screws and

wall anchors

Need help?

Do you have a question about the Honeywell Home T6 Pro TH6220U2000 and is the answer not in the manual?

Honeywell Home T6 Pro TH6220U2000 Specifications

General

Stages	Up to 2 Heat / 2 Cool
Type	Programmable Thermostat
Programmability	7-Day Scheduling
Compatibility	Compatible with most heating and cooling systems
Power Method	Battery or C-Wire
Terminal Designations	R, Rc, C, W, W2, Y, Y2, G, O/B
Display	Backlit
Operating Humidity Range	5% to 90% RH
Operating Temperature Range	32°F to 122°F (0°C to 50°C)
Temperature Range	40°F to 99°F
Shipping Temperature Range	-20°F to 150°F
Wi-Fi Connectivity	Yes
Power Supply	24V AC