Honeywell Home T6 Pro User Manual

Package Includes:
• T6 Pro Thermostat
• UWP™ Mounting System
• Decorative Cover Plate
• Screws and Anchors
• 2 AA Batteries
• Thermostat Literature
T6 Pro Programmable
Thermostat
User Guide
–
+
TH6320U2008,
TH6220U2000,
TH6210U2001,
Read before installing
Visit https://www.honeywellhome.com/support
Customer assistance
Thermostat controls
• System status
information
Cool On/Heat On/Em Heat
On, Recovery, Compressor
Protection
• Schedule information
Following time based
schedule
• Actual time
• Mode
Select system mode Heat/
Off/Cool/Auto/EM Heat
(emergency heat)
• Menu
Press to display options.
Start here to set a program
schedule
• Indoor temperature
setpoint
Press + or – to change
temperature setting
• Actual indoor
temperature
• Temperature/
Navigation buttons
Press to increase or
decrease temperature
setpoint and to navigate
menus and menu options
• Fan
Select Fan mode Auto/On/
Circulate
The screen will wake up by pressing any of the five buttons. If powered by the C wire, the screen stays lit for 45 seconds
after you complete changes. If powered by battery only, the screen stays lit for 8 seconds. Depending on how your
thermostat was installed, the screen light may always be on.

Honeywell Home T6 Pro Specifications

General

Model	T6 Pro
Temperature Control	Precise Temperature Control
Backlit	Yes
Operating Modes	Heat, Cool, Auto, Off
Fan Modes	Auto, On, Circulate
Weight	0.5 lbs
Temperature Range	Heat: 40°F to 90°F, Cool: 50°F to 99°F
Warranty	1-Year Limited Warranty
Programmable	Yes
Power Source	Battery or Hardwired
Energy Saving	Yes
Stages	Up to 3 Heat/2 Cool
Smart Features	Remote control via app, Geofencing, Alerts
Dimensions	4.06 in. H x 4.06 in. W x 1.06 in. D
Change Reminders	Filter
Display	Touchscreen
Connectivity	Wi-Fi