Operating Manual
16
69-2667ES—03
Special features
Auto Changeover: When set to Auto, the thermostat automatically selects heating or
cooling depending on the indoor temperature. See page 14 for more information.
Adaptive Intelligent Recovery: This feature allows the thermostat to “learn” how long
the furnace and air conditioner take to reach programmed temperature settings, so
the temperature is reached at the time you set. For example: Set the Wake time to 6
am, and the temperature to 70°. The heat will come on before 6 am, so the tempera-
ture is 70° by the time you wake at 6. The message “Recovery” is displayed when the
system is activated before a scheduled time period.
Compressor Protection: This feature forces the compressor to wait a few minutes
before restarting, to prevent equipment damage. During the wait time, the message
“Wait” is displayed on screen.
To Next Page
Loading...
Need help?
General
