TH7000 Series
25
69-2667ES—03
If you have difficulty with your thermostat, please try the following suggestions.
Most problems can be corrected quickly and easily.
Display is blank • Check circuit breaker and reset if necessary.
• Make sure power switch at heating & cooling system is on.
• Make sure furnace door is closed securely.
• If thermostat is battery powered, make sure fresh AA alkaline batteries
are correctly installed (see page 18).
No response to
key presses (or
temperature will
not change)
• Check to make sure the thermostat is not locked (see page 17).
Make sure heating and cooling temperatures are set to acceptable ranges:
• Heat: 40° to 90°F (4.5° to 32°C)
• Cool: 50° to 99°F (10° to 37°C)
Backlight is dim • If thermostat is battery powered, make sure fresh AA alkaline batteries
are correctly installed (see page 18).
• If thermostat is AC powered, a dim display is normal. The backlight
remains on at a low level, and brightens when a key is pressed.
In case of difficulty
To Next Page
Loading...
Need help?
General
