1 - 25
USB HID
Scan the following code to program the 3820/3820i for USB HID bar code scan-
ners. Scanning this code changes the terminal ID to 131.
USB Com Port Emulation
Scan the following code to program the 3820/3820i to emulate a regular RS-
232-based Com Port. If you are using a Microsoft® Windows® PC, you will
need to download a driver from the Honeywell website (www.honey-
wellaidc.com
). The driver will use the next available Com Port number. Apple®
Macintosh computers recognize the image scanner as a USB CDC class device
and automatically uses a class driver. Scanning the code below changes the
terminal ID to 130.
Note: No extra configuration (e.g., baud rate) is necessary.
CTS/RTS Emulation
USB Keyboard (PC)
USB Keyboard (Mac)
USB Japanese Keyboard (PC)
USB HID bar code Image
Scanner
USB CTS/RTS Emulation On
* USB CTS/RTS Emulation Off
To Next Page
Loading...
Need help?
General
