Need help?Do you have a question about the Honeywell Voyager 1602g and is the answer not in the manual?
General| Storage temperature (T-T) | -20 - 60 °C |
|---|---|
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| Type | Handheld bar code reader |
| Sensor type | - |
| Scanner type | 1D/2D |
| Pitch reading angle | -60 - 60 ° |
| Motion tolerance (cm/s) | 10 |
| Optical sensor resolution | 640 pixels |
| Light levels (direct sunlight) | 0 - 100000 lx |
| 2D (matrix & stacked) barcodes supported | Aztec Code, Codablock, Data Matrix, MaxiCode, MicroPDF417, PDF417, QR Code |
| Keys quantity | 2 keys |
| Product color | Black |
| LED indicators | Yes |
| Housing material | Plastic |
| International Protection (IP) code | IP42 |
| Battery life | 12 h |
| Charging time | 3 h |
| Battery voltage | 3.7 V |
| Battery capacity | 750 mAh |
| Power source type | Battery |
| Number of reads per charge | 2250 |
| Number of batteries supported | 1 |
| USB version | 2.0 |
| PC connection | USB 2.0 |
| Wireless range | 10 m |
| Bluetooth version | 2.1+EDR |
| Operating frequency | 2400 - 2500 MHz |
| Standard interfaces | Bluetooth, USB |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Connectivity technology | Wireless |
| Mobile operating systems supported | Android, Windows Mobile, iOS |
| Harmonized System (HS) code | 84716070 |
Weight and Dimensions| Depth | 22 mm |
|---|---|
| Width | 48 mm |
| Height | 120 mm |
| Weight | 100 g |
Explains how to connect the scanner to Bluetooth-enabled devices like PCs and tablets.
Details how to set up the scanner for corded operation via USB.
Provides critical safety guidelines for handling and disposing of lithium batteries.
Explains how to store barcode data when disconnected from the host.
Improves the scanner's ability to read damaged or badly printed barcodes.
Defines custom rules for how scanned data is output, including insertions and modifications.
Lists commands used to manipulate data within the format editor.
Resets the scanner to its original factory settings and disables plugins.
Lists the mechanical, electrical, radio, and environmental parameters of the scanner.
Identifies the location of safety and compliance labels on the device.
Offers solutions for common scanner issues like symbol reading or data display problems.
To Next Page
