EasyManua.ls Logo

Honeywell VOYAGER 1250G User Manual

Honeywell VOYAGER 1250G
240 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Voyager
TM
1250g
Single-Line Laser Scanner
User’s Guide

Table of Contents

Other manuals for Honeywell VOYAGER 1250G

Question and Answer IconNeed help?

Do you have a question about the Honeywell VOYAGER 1250G and is the answer not in the manual?

Honeywell VOYAGER 1250G Specifications

General IconGeneral
Sensor typeLaser
Scanner type1D
Tilt angle range-30 - 30 °
Decoding standards1D, GS1
Pitch reading angle-60 - 60 °
Light levels (direct sunlight)0 - 75000 lx
Standard interfacesUSB, RS-232
Input voltage5 V
Power consumption140 mA
ShockproofYes
Dimensions (WxDxH)168 x 60 x 74 mm
Product colorBlack
International Protection (IP) codeIP41
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 95 %
Harmonized System (HS) code84716070
Weight and Dimensions IconWeight and Dimensions
Weight133 g

Summary

1 Getting Started

Connecting with USB

Details on connecting the scanner via USB, including cable connection to computer.

Connecting with Keyboard Wedge

Instructions for connecting the scanner using a keyboard wedge interface.

Connecting with RS232 Serial Port

Steps for connecting the scanner via an RS232 serial port to a computer.

Connecting with RS485

Instructions for connecting the scanner to an IBM POS terminal interface using RS485.

Resetting the Factory Defaults

Steps to reset the scanner to its original factory default settings.

2 Programming the Interface

Keyboard Wedge

How to program the scanner for IBM PC AT and compatibles keyboard wedge interface.

IBM PS2 Keyboard

Programming the scanner for IBM PS2 keyboard wedge interface.

RS232 Serial Port

Using the RS232 interface bar code to configure serial port settings.

RS485

Using Plug and Play codes to program the scanner for an IBM POS terminal interface.

USB PC or Macintosh Keyboard

Programming the scanner for USB PC or Macintosh keyboard interfaces.

USB HID

Programming the scanner for USB HID bar code scanners.

USB Serial Commands

Programming the scanner to emulate a regular RS232-based COM Port.

3 Input/Output Settings

4 Data Editing

5 Data Formatting

To Add a Data Format

Step-by-step guide to creating and saving data formats.

Data Format Editor Commands

Commands for manipulating data formats, including sending characters.

6 Symbologies

8 Utilities

Installing EZConfig-Scanning from the Web

Step-by-step guide to downloading and installing EZConfig-Scanning software.

9 Serial Programming Commands

Resetting the Standard Product Defaults

Restoring the scanner to its standard product default settings.

10 Product Specifications

Voyager 1250g Scanner Product Specifications

Detailed specifications for the Voyager 1250g scanner, including mechanical, electrical, and scan performance.

11 Maintenance

Replacing an Interface Cable

Step-by-step instructions for replacing the scanner's interface cable.

Troubleshooting a Voyager Scanner

Guide to diagnosing and resolving common scanner issues.

12 Customer Support

Technical Assistance

Contact information for technical support by region.

Related product manuals