Honeywell VOYAGER 1250G - Beeper Pitch - Good Read; Beeper - Transmit Order; Beeper Pitch - Error

3 - 3
Beeper Pitch – Good Read
The beeper pitch codes modify the pitch (frequency) of the beep the scan-
ner emits on a good read.
Default = Medium.
Beeper - Transmit Order
The beeper transmit order determines when the good read beep occurs.
The scanner can be set to emit the good read beep either before or after
data transmission.
Default = Before Transmission.
Beeper Pitch – Error
The beeper pitch codes modify the pitch (frequency) of the sound the scan-
ner emits when there is a bad read or error.
Default = Razz.
Low (1600 Hz)
* Medium (2350 Hz)
High (4200 Hz)
* Before Transmission
After Transmission
* Razz (100 Hz)
Medium (2000 Hz)
High (4200 Hz)