Honeywell VOYAGER 1250G - LED Indicators; LED Settings

3 - 6
LED Indicators
The green and red LEDs can be programmed to be On or Off and at different
brightness levels to indicate various scanner states. Use the following bar
codes to program the LED indicators.
LED Settings
Default = Red LED Off with Laser, Green LED On with Good Scan.
Green LED Off
* Red LED Off
* Green LED On with Good Scan
Red LED On with Good Scan
Green LED On with Laser
Red LED On with Laser
Red LED On when CodeGate
Disabled
Green LED On when CodeGate
Disabled
Green LED On when In-Stand
Red LED On when In-Stand