Need help?Do you have a question about the Honeywell MK9535-79A540 - MS9535 VoyagerBT - Wireless Portable Barcode Scanner and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | MK9535-79A540 - MS9535 VoyagerBT - Wireless Portable Barcode Scanner |
| Category | Barcode Reader |
| Language | English |
Explains single-code and multi-code configuration methods for scanners.
Configuration and decode rules for UPC/EAN, Code 128, Code 39, and 2 of 5 codes.
Settings for Codabar, Code 93, Code 11, Telepen, and Plessey codes.
Additional decode features and configurable code lengths.
Settings for 2-digit, 5-digit, Bookland, and remote supplements.
Options for GS1 DataBar 14, Limited, and Expanded symbologies.
Settings for ISBT Code 128 configuration, special transmit, and ID transmission.
How to configure concatenation sequences for ISBT Code 128.
Setting up custom concatenation sequences using identifiers.
Settings for Light Pen, RS232, Keyboard, OCIA, and RS485 interfaces.
Configuration for modes, buffers, scans, decode features, LEDs, and beepers.
Settings for transmission delays, time outs, and host commands.
Adding custom prefix characters and assigning ID characters.
Standard prefix/suffix options like STX, AIM, UPC, CR, LF, and Tab.
Settings for Longitudinal Redundancy Check and Block Check Character.
Defining character replacements and adding custom suffix characters.
Options for UPC/EAN check digits, expansion, GTIN, and other code formatting.
Formatting settings for Code 39, Code 11, Telepen, Plessey, and 2 of 5 codes.
Configuring parity, baud rate, data/stop bits, and handshaking.
Settings for keyboard emulation, country tables, system types, and delays.
Options for make/break codes, cleanup bits, and Alt-Mode.
Settings for OCIA mode, defaults, and specific interface types.
Configuring light pen mode, data format, and polling source.
Adjusting narrow element width for light pen emulation.
Configuring IBM ports, RS485 communication, and reserved codes.
Settings for USB interface, speeds, defaults, and emulation modes.
Reference tables for code bytes, types, ASCII, and extended keys.
Configuring activation range, scan modes, CodeGate status, laser modes, and time outs.
Enabling HH and host-controlled laser emulation modes.
Settings for PDF, CodeGate, MicroPDF, and composite code handling.
Settings for BT address, PIN, transmission, sleep modes, and cradle management.
Configuring inventory mode, cradle transmit, beeps, and quantity fields.
Using bar codes to enter quantities for inventory items.
Settings for serial program, TTL UART, and loading custom defaults.
Configuring activation modes, laser-on time out, blinky mode, and sleep modes.
Loading custom defaults, using serial program mode, and recalling factory defaults.
Regional contact details for technical support.
Information on obtaining product service and repair assistance online.
To Next Page