38 Voyager 1602g User Guide
PDAs/Mobility Systems Devices
You may also use the scanner with a PDA or a Honeywell Mobility Systems device.
Scan the barcode below and follow the instructions supplied with your Bluetooth
device to locate the scanner, and connect with it.
Change the Scanner’s Bluetooth PIN Code
Some devices require a PIN code as part of the Bluetooth security features. Your
scanner’s default PIN is 1234, which you may need to enter the first time you con-
nect to your host. The PIN code must be between 1 and 16 characters. To change
the PIN, scan the barcode below and then scan the appropriate numeric barcodes
from the Programming Chart. Scan Save to save your selection.
Minimize Bluetooth/ISM Band Network Activity
The settings described below can help you customize the relinking behavior of the
wireless area-imaging system to obtain the best compromise between conve-
nience and low interference.
Note: ISM band refers to the 2.4 to 2.48 GHz frequency band used by wireless networks,
cordless phones, and Bluetooth.
BT Connection - PDA/Mobility Systems Device
To Next Page
Loading...
