36 Voyager 1602g User Guide
Corded USB Serial
Scan the following code to program the corded scanner to emulate a regular
RS232-based COM Port, then power cycle the host. If you are using a Microsoft®
Windows® PC, you will need to download a driver from the Honeywell website
(www.honeywellaidc.com). The driver will use the next available COM Port number.
Apple® Macintosh computers recognize the scanner as a USB CDC class device
and automatically use a class driver.
Note: No extra configuration (e.g., baud rate) is necessary.
Corded CTS/RTS Emulation
Corded ACK/NAK Mode
Corded CTS/RTS Emulation On
* Corded CTS/RTS Emulation
Off
* Corded ACK/NAK Mode Off
To Next Page
Loading...
