Honeywell Voyager 1602g User Manual

8 Voyager 1602g User Guide
Resetting the Custom Defaults
If you want the custom default settings restored to your scanner, scan the Activate
Custom Defaults barcode below. This is the recommended default barcode for
most users. It resets the scanner to the custom default settings. If there are no cus-
tom defaults, it will reset the scanner to the factory default settings. Any settings
that have not been specified through the custom defaults will be defaulted to the
factory default settings.
Note: The Custom Defaults settings apply to all workgroups Scanning the Save Defaults
barcode also causes both the scanner and the host to perform a reset and become
unlinked. You must relink (pair) the scanner to the host. See Wireless System
Operation beginning on page 37 for additional information.
Activate Custom Defaults

Honeywell Voyager 1602g Specifications

General

Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Type	Handheld bar code reader
Sensor type	-
Scanner type	1D/2D
Pitch reading angle	-60 - 60 °
Motion tolerance (cm/s)	10
Optical sensor resolution	640 pixels
Light levels (direct sunlight)	0 - 100000 lx
2D (matrix & stacked) barcodes supported	Aztec Code, Codablock, Data Matrix, MaxiCode, MicroPDF417, PDF417, QR Code
Keys quantity	2 keys
Product color	Black
LED indicators	Yes
Housing material	Plastic
International Protection (IP) code	IP42
Battery life	12 h
Charging time	3 h
Battery voltage	3.7 V
Battery capacity	750 mAh
Power source type	Battery
Number of reads per charge	2250
Number of batteries supported	1
USB version	2.0
PC connection	USB 2.0
Wireless range	10 m
Bluetooth version	2.1+EDR
Operating frequency	2400 - 2500 MHz
Standard interfaces	Bluetooth, USB
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wireless
Mobile operating systems supported	Android, Windows Mobile, iOS
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	22 mm
Width	48 mm
Height	120 mm
Weight	100 g