Honeywell Voyager 1602g - Reset Scanner; Scanner Report; Scanner Address; Linked Modes

46 Voyager 1602g User Guide
Reset Scanner
Scanning this barcode reboots the scanner and causes it to relink with the host.
Scanner Report
Scan the barcode below to generate a report for the connected scanners. The
report indicates the port, work group, scanner name, and address. To assign a
name to your scanner, refer to Menu Command Syntax, page 177.
Scanner Address
Scan the barcode below to determine the address of the scanner you are using.
Linked Modes
Locked Link Mode and Open Link Mode are the link modes that accommodate dif-
ferent applications. Scan the appropriate barcodes included in the Open Link and
Locked Link Mode explanations that follow to switch from one mode to another.
Default = Open Link Mode.
Locked Link Mode - Single Scanner
When you scan the barcode below, only the linked scanner can connect to the host
and other scanners are blocked from being linked to that host.
Reset Scanner
Scanner Report
Scanner Address
Locked Link Mode
(Single Scanner)