Voyager 1602g User Guide 209
MAINTENANCE
Repairs
Repairs and/or upgrades are not to be performed on this product. These services
are to be performed only by an authorized service center Customer Support on
page xv.
Maintenance
Your device provides reliable and efficient operation with a minimum of care.
Although specific maintenance is not required, the following periodic checks
ensure dependable operation:
Clean the Scanner
The scanner housing and scanner window may be cleaned with a soft cloth
dampened with water or a mild detergent-water solution. If a mild detergent
solution is used, wipe the scanner with a clean cloth dampened only with water to
remove any detergent residue.
Note: Reading performance may degrade if the scanner’s window is not clean. If the window
is visibly dirty, or if the scanner isn’t operating well, clean the window.
Caution: Do not submerge the scanner in cleaning solution. Do not use
abrasive wipes or cloths on the scanner’s window. Abrasive
wipes may scratch the window. Never use solvents (e.g.,
acetone) on the housing or window. Solvents may damage the
finish or the window.
Caution: Ensure all components are dry prior to mating the scanner with
charging accessories or other peripheral devices. Mating wet
components may cause damage not covered by the warranty.
To Next Page
Loading...
