Voyager 1602g User Guide 69
Flashlight Mode
If you want the scanner to act as a flashlight, scan one of the barcodes below.
Pressing the programmable button (short or long press) turns the flashlight on.
Pressing the scan button turns it back off.
Bluetooth Pair/Unpair
The programmable button can be used to toggle between pairing and unpairing
from the host. Scan one of the following barcodes to set the Bluetooth Pair/Unpair
with a short or long press of the programmable button:
The Bluetooth LED flashes in the following pattern after a short or long press of the
programmable button:
Flashlight Mode On -
Short Press
Flashlight Mode On -
Long Press
LED Indicator Beeper Indicator Bluetooth Status
Blue, off None Bluetooth connection has not been established
Bluetooth Pair/Unpair
On - Short Press
Bluetooth Pair/Unpair On
- Long Press
To Next Page
Loading...
