Voyager 1602g User Guide 81
Aimer Mode
This feature allows you to turn the aimer on and off. When the Interlaced barcode
is scanned, the aimer is interlaced with the illumination LEDs. Default = Interlaced.
Centering
Use Centering to narrow the scanner’s field of view to make sure that when the
scanner is hand-held, it reads only those barcodes intended by the user. For
instance, if multiple codes are placed closely together, centering will insure that
only the desired codes are read. (Centering can be used in conjunction with Aimer
Delay, page 80 for the most error-free operation in applications where multiple
codes are spaced closely together. Using the Aimer Delay and Centering features,
the scanner can emulate the operation of older system, such as linear laser bar-
code scanners.)
If a barcode is not touched by a predefined window, it will not be decoded or output
by the scanner. If centering is turned on by scanning Centering On, the scanner
only reads codes that pass through the centering window you specify using the
Top of Centering Window, Bottom of Centering Window, Left, and Right of Cen-
tering Window barcodes.
To Next Page
Loading...
