EasyManuals Logo

Honeywell Voyager 1602g User Manual

Honeywell Voyager 1602g
245 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
44 Voyager 1602g User Guide
Safety Precautions for Lithium Batteries
Do not place batteries in fire or heat the batteries.
Do not store batteries near fire or other high temperature locations.
Do not store or carry batteries together with metal objects.
Do not expose batteries to water or allow the batteries to get wet.
Do not connect (short) the positive and negative terminals, of the batteries, to
each other with any metal object.
Do not pierce, strike or step on batteries or subject batteries to strong impacts or
shocks.
Do not disassemble or modify batteries.
Beeper and LED Sequences and Meaning
The scanner contains 2 LEDs on the top of the unit that indicate linking status,
decoding state, and battery condition. There are audible indicators as well: 1 razz
or error tone = error; 2 beeps = menu change; 1 beep = all other successes.
The table below lists the indication and cause of the LED indicators and beeps for
the scanner.
Caution: Use only Honeywell Li-ion battery packs, model number 3H21-
00000112 or 163480-0001, rated 3.7 Vdc, 2.77Whr in this
device. Use of any non-Honeywell battery may result in
damage not covered by the warranty.
Caution: Danger of explosion if batteries are incorrectly replaced.
Dispose of used batteries according to the recycle program for
batteries as directed by the governing agency for the country
where the batteries are to be discarded.

Table of Contents

Other manuals for Honeywell Voyager 1602g

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell Voyager 1602g and is the answer not in the manual?

Honeywell Voyager 1602g Specifications

General IconGeneral
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)0 - 95 %
TypeHandheld bar code reader
Sensor type-
Scanner type1D/2D
Pitch reading angle-60 - 60 °
Motion tolerance (cm/s)10
Optical sensor resolution640 pixels
Light levels (direct sunlight)0 - 100000 lx
2D (matrix & stacked) barcodes supportedAztec Code, Codablock, Data Matrix, MaxiCode, MicroPDF417, PDF417, QR Code
Keys quantity2 keys
Product colorBlack
LED indicatorsYes
Housing materialPlastic
International Protection (IP) codeIP42
Battery life12 h
Charging time3 h
Battery voltage3.7 V
Battery capacity750 mAh
Power source typeBattery
Number of reads per charge2250
Number of batteries supported1
USB version2.0
PC connectionUSB 2.0
Wireless range10 m
Bluetooth version2.1+EDR
Operating frequency2400 - 2500 MHz
Standard interfacesBluetooth, USB
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technologyWireless
Mobile operating systems supportedAndroid, Windows Mobile, iOS
Harmonized System (HS) code84716070
Weight and Dimensions IconWeight and Dimensions
Depth22 mm
Width48 mm
Height120 mm
Weight100 g

Related product manuals