Honeywell Voyager 1602g - Codablock F; Label Code

Voyager 1602g User Guide 153
Codablock F
<Default All Codablock F Settings>
Codablock F On/Off
If you are reading Code 128 barcodes, Codablock F should remain disabled. If you
are enabling Codablock F, you should disable Code 128 (see Code 128 on page
134).
Codablock F Message Length
Scan the barcodes below to change the message length. Refer to Message Length
Description (page 120) for additional information. Minimum and Maximum
lengths = 1-2048. Minimum Default = 1, Maximum Default = 2048.
Label Code
The standard Label Code is used in libraries. Default = Off.
On
* Off
Minimum Message Length
Maximum Message Length
On