Voyager 1602g User Guide 67
INPUT/OUTPUT SETTINGS
Programmable Button
The second, smaller button on the scanner can be programmed so that pressing
the button displays a virtual keyboard on the host, displays the battery charge sta-
tus, puts the scanner into flashlight mode, or pairs and unpairs the Bluetooth con-
nection between the scanner and the host. You may program one of these
selections to occur after a short button press, and another selection to occur after
a long button press. The scanner emits a short beep to let you know when the but-
ton has been held down long enough.
Virtual Keyboard
Once your scanner has been connected directly to an Apple® iPad, smart phone, or
laptop, you can toggle the virtual keyboard on the host with either a short or a long
press of the programmable button.
Note: This feature is only supported with Apple devices.
Virtual Keyboard On -
Short Press
To Next Page
Loading...
