Honeywell Voyager 1602g - Interleaved 2 of 5 Message Length; NEC 2 of 5

Voyager 1602g User Guide 127
When Check Digit is set to Validate and Transmit, the scanner only reads Inter-
leaved 2 of 5 barcodes printed with a check digit, and will transmit this digit at the
end of the scanned data. Default = No Check Digit.
Interleaved 2 of 5 Message Length
Scan the barcode to change the message length. Refer to for additional informa-
tion. Minimum and Maximum lengths = 2-80. Minimum Default = 4, Maximum
Default = 80.
NEC 2 of 5
< Default All NEC 2 of 5 Settings >
NEC 2 of 5 On/Off
* No Check Digit
Validate, but Don’t Transmit
Validate and Transmit
Minimum Message Length
Maximum Message Length
* On