Voyager 1602g User Guide 25
Apple® Macintosh computers recognize the scanner as a USB CDC class device
and automatically uses a class driver. This interface is only appropriate for an
Access Point.
Note: No extra configuration (e.g., baud rate) is necessary.
CTS/RTS Emulation
ACK/NAK Mode
Secondary Interface for USB
When using a USB interface, you may wish to configure your scanner to
communicate with scanner management software. Scan the Secondary Interface
On barcode to communicate with the scanner management software. To disable
this capability, scan Secondary Interface Off. This interface is only appropriate for
an Access Point. Default = Secondary Interface On.
To Next Page
Loading...
