70 Voyager 1602g User Guide
Disable Programmable Button
To disable the programmable button, scan one or both of the barcodes below.
Default = Disable Short and Long Press.
Power Up Beeper
The scanner can be programmed to beep when it’s powered up. Scan the Off bar-
code(s) if you don’t want a power up beep. Default = Power Up Beeper On.
Beep on BEL Character
You may wish to force the scanner to beep upon a command sent from the host. If
you scan the Beep on BEL On barcode below, the scanner will beep every time a
BEL character is received from the host. Default = Beep on BEL Off.
Blue flash None Scanner is attempting to pair with Bluetooth device
Blue, on 1 beep Successful Bluetooth Pairing
LED Indicator Beeper Indicator Bluetooth Status
To Next Page
Loading...
