Honeywell Voyager 1602g - Troubleshooting

194 Voyager 1602g User Guide
Codabar Default All Codabar
Settings
CBRDFT 120
Off CBRENA0 120
*On CBRENA1 120
Codabar Start/Stop Char. *Don’t Transmit CBRSSX0 121
Transmit CBRSSX1 121
Codabar Check Char. *No Check Char. CBRCK20 121
Validate, But Don’t Transmit CBRCK21 121
Validate, and Transmit CBRCK22 121
Codabar Concatenation *Off CBRCCT0 122
On CBRCCT1 122
Require CBRCCT2 122
Codabar Message Length Minimum (2 - 60) *4 CBRMIN## 122
Maximum (2 - 60) *60 CBRMAX## 122
Code 39 Default All Code 39
Settings
C39DFT 123
Off C39ENA0 123
*On C39ENA1 123
Code 39 Start/Stop Char. *Don’t Transmit C39SSX0 123
Transmit C39SSX1 123
Code 39 Check Char. *No Check Char. C39CK20 123
Validate, But Don’t
Transmit
C39CK21 123
Validate,
and Transmit
C39CK22 123
Code 39 Message Length Minimum (0 - 48) *0 C39MIN## 124
Maximum (0 - 48) *48 C39MAX## 124
Code 39 Append *Off C39APP0 124
On C39APP1 124
Code 32 Pharmaceutical (PARAF) *Off C39B320 125
On C39B321 125
Code 39 Full ASCII *Off C39ASC0 125
On C39ASC1 125
Code 39 Code Page C39DCP 125
Interleaved 2 of 5 Default All Interleaved
2 of 5 Settings
I25DFT 126
Off I25ENA0 126
*On I25ENA1 126
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page