Honeywell Voyager 1602g - Page 210

Voyager 1602g User Guide 193
Intercharacter Delay Range 0 - 1000 (5ms
increments)
DLYCHR## 96
User Specified
Intercharacter Delay
Delay Length
0 - 1000 (5ms increments)
DLYCRX## 97
Character to Trigger Delay DLY_XX## 97
Interfunction Delay Range 0 - 1000 (5ms
increments)
DLYFNC## 97
Intermessage Delay Range 0 - 1000 (5ms
increments)
DLYMSG## 98
Data Formatter Selections
Data Format Editor *Default Data Format (None) DFMDF3 100
Enter Data Format DFMBK3## 101
Clear One Data Format DFMCL3 101
Clear All Data Formats DFMCA3 101
Data Formatter Data Formatter Off DFM_EN0 115
*Data Formatter On,
Not Required,
Keep Prefix/Suffix
DFM_EN1 116
Data Format Required,
Keep Prefix/Suffix
DFM_EN2 116
Data Formatter On,
Not Required,
Drop Prefix/Suffix
DFM_EN3 116
Data Format Required,
Drop Prefix/Suffix
DFM_EN4 116
Data Format Non-Match Error
Tone
*Data Format Non-Match Error
Tone On
DFMDEC0 116
Data Format Non-Match Error
Tone Off
DFMDEC1 117
Primary/Alternate Data Formats Primary Data Format ALTFNM0 117
Data Format 1 ALTFNM1 117
Data Format 2 ALTFNM2 117
Data Format 3 ALTFNM3 117
Single Scan Data Format Change Single Scan-Primary
Data Format
VSAF_0 117
Single Scan-Data Format 1 VSAF_1 118
Single Scan-Data Format 2 VSAF_2 118
Single Scan-Data Format 3 VSAF_3 118
Symbologies
All Symbologies *All Symbologies Off ALLENA0 120
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page