Honeywell 2MLL-PMEB - Page 112

Chapter 9 P2P
6 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R220
Honeywell January 2019
5) P2P project
Select SoftMaster  View P2P
[Figure 9.4.3] Initial screen of P2P Setting
6) Communication module and Communication period setting
If right-click the P2P  “Add Item”  “P2P Communication”, screen of Communication module settings
and Communication period settings is opened. In this screen, communication module, communication
period and output data in case of emergency can be specified.
[Figure 9.4.4] P2P setting window
Classification
Description
Communication
module settings
Module type
Select Pnet I/F module
Base No.
Setting of base position installed
Range of setting: 0~7 (varying depending on the CPU module)
Slot No.
Setting of slot position installed
Range of setting: 0~11
P2P index
Setting of P2P index number
Range of setting: 1~8
[Table 9.4.3] Communication module setting