Chapter 10 Program Example
9 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R220
Honeywell January 2019
At this time, double click the applicable module and open the Slave Configuration window. In the slave
configuration window, it is available to set the Station address and Description.
[Figure 10.1.18] Slave Configuration
10.1.2 SoftMaster setting
This part describes how to assign the internal memory by SoftMaster.
Click ‘Project’ ->’New Project’ and select project name and PLC series in the New Project window.
[Figure 10.1.19] New project
To Next Page
Loading...
