Chapter 10 Program Example
7 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R220
Honeywell January 2019
If the above process is completed, all setting is finished.
In order to download the configured information in COM-C module, connection setting is as shown below.
Select [Setting] – [Device assignment], ‘Device Assignment CIF Serial Driver’ screen is displayed. Select the
COM port connected with Pnet I/F module and Click ‘Connect COM x’ and check the applicable Check box.
Finally, Click the ‘OK’, Communication is available to download connection information.
[Figure 10.1.13] Device Assignment CIF Serial Driver (1)
[Figure 10.1.14] Device Assignment CIF Serial Driver (2)
After connected, select [Online] – [Download] to download.
[Figure 10.1.15] Download
If setting and download is completed, All setting of SyCon is finished. Before close the SyCon, It is very useful to
save the network file in order to recover the damaged network.
This part explains the automatic setting.
To Next Page
Loading...
