Chapter 7 N Configurator Setting
24 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R240
Honeywell January 2019
[Figure 7.6.8] Network topology collected and composed
The composition of slaves physically connected to master can be easily verified in this
way.
7.6.5 I/O Data Monitoring
This is the function to monitor I/O data of slaves. This can confirm whether the I/O of a
certain slave is correct. If “I/O Monitor…” item is selected from “Diagnostics,” then existing
data communication is stopped, and the monitor window pops up as below. If users enter
the output into the output data and click update button, then the value will be displayed
through slave. And then the values entered through current slave will be monitored
through the input data area. (Here the number of data available for I/O is 32 bytes
respectively.)
[Figure 7.6.9] I/O monitor
To Next Page
Loading...
