6
Maintenance
Your doorbell and push button require no maintenance except to periodically
change the battery.
If using the correct battery, its life should be approximately:
• Up to 2 years for the push button; replace with CR2032 lithium battery
Low Battery Notification
When the push button batteries are low, two beep sounds are heard after the
normal tune.
Reset
This process removes all pairings, including the push button that came with
this doorbell:
1. Unplug the doorbell.
2. Press and hold the Setting button, and plug the doorbell back in at the
same time.
3. The halo light will circle, and the doorbell is returned to its factory default
settings.
Specications
Doorbell Push Button
Operating Temperature
ActivLink™ 916.8 MHz 916.8 MHz
84dBA -
RF Power - <1.2W
Battery Type
Hz 300 mA
- Up to 2 years
Rain proof N/A Pass UL1598 rain test.
Precautions and warnings
CAUTION: Before operating, make sure that the product components have
not been damaged, have not been exposed to water or high temperatures.
To Next Page
Loading...
