Honeywell 5110 - Data Matrix Message Length

7 - 53
Data Matrix
Note: Data Matrix can only be read by a 2D OEM Engine.
< Default All Data Matrix Settings >
Data Matrix
Data Matrix Message Length
Scan the bar codes below to change the message length. Refer to Message
Length Description (page 7-2) for additional information. Minimum and
Maximum lengths = 1-1500. Minimum Default = 1, Maximum Default = 1500.
MaxiCode
Note: MaxiCode can only be read by a 2D OEM Engine.
< Default All MaxiCode Settings >
Off
* On
Maximum Message Length
Minimum Message Length