NOTES
8
CARE AND MAINTENANCE
When properly maintained, your safe will continue to operate for many years. In order to ensure
optimal performance of your safe, please follow these simple precautions:
CLEAN HANDS - Never attempt to operate the digital keypad if your hands have excessive dirt,
debris or liquids on them.
CLEAN SAFE – To clean the surface of your safe, it is recommended that you use a mild cleaner
(e.g., window cleaner) to avoid scratching or discoloring the surface. Always wipe dry and NEVER
use abrasive cleansers on the safe or digital keypad.
For future reference, store this Operation and Installation Guide in a secure area away from the
safe.
SECURE LOCKOUT PERIOD
If the wrong user code is entered into the keypad 3 times in a row, the keypad will automatically go
into lockout mode and you will not be able to open the safe using the digital keypad for 15 minutes.
During the lockout period you can access the safe using the override access keys.
LOST OR FORGOTTEN USER CODES
LOSS OF BOTH PRIMARY AND SECONDARY USER CODES
It is recommended that you record your new user codes in the “Digital User Code Record” section
on page 10 and keep this manual in a secure location away from the safe. However, if you lose
or forget either the primary or secondary user codes, you may open the safe using the override
access keys. Follow the instructions on pages 4 & 5 to reset the codes.
To Next Page
Loading...
Need help?
General
