Honeywell 800 Series User Manual

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD
66-2069EP—08 30
Fig. 22. Flow Chart 4: Auto Setup Page 3.
IS THE AUTO SETUP
RATIO UNACCEPTABLE?
RATIO > 80%
DISPLAY ALTERNATES
SHOWING ‘UA’ AND RATIO
IS THE AUTO SETUP
RATIO MARGINAL?
71% < RATIO < 81%
RATIO IS UNACCEPTABLE
RATIO MAY BE ACCEPTABLE
DISPLAY ALTERNATES SHOWING ‘AC’
AND THE NEW RATIO SETTING
NORMAL OPERATION
NORMAL OPERATION
Y
N
Y
M34460A
AUTO SETUP - PAGE 3
(CONTINUED)
NOTE:
PRESS RESET AT ANY TIME
DURING THIS PROCEDURE
TO CANCEL AUTO SETUP
RESET
rE
PRESS RESET TO CANCEL AUTO SETUP
RESET
rE
DISPLAY SHOWS ‘_ _’ FOR ONE SECOND
AND NEW VALUES ARE SAVED
PRESS ACCEPT RATIO / SET GAIN TO
ACCEPT THE RATIO DISPLAYED
ACCEPT
RATIO
SET GAIN

Honeywell 800 Series Specifications

General

Brand	Honeywell
Model	800 Series
Category	Barcode Reader
Language	English