Honeywell 800 Series User Manual

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD
31 66-2069EP—08
Fig. 23. Flow Chart 5: Manual Flame On Setup.
IS THE PANEL LOCKED?
RELAY ON
SET
POINT
PRESS RELAY ON SET POINT
FOR 2 SECONDS
2 SECS
IS THE AUTO SET
LIGHT LIT?
DISPLAY SHOWS CURRENT
RELAY SETTING
DISPLAY SHOWS ‘CF’,
MEANING CONFIRM
DISPLAY SHOWS ‘PL’
UNTIL KEY RELEASED
NORMAL OPERATION
N
SETTING RELAY ON VALUE
Y
N
Y
OR
M34461A
PRESS RESET OR WAIT 4 SECONDS TO
CANCEL CHANGING THE AUTO SETTING
RESET
rE
USE INCREASE OR DECREASE KEYS
TO ADJUST SETTING
INCREASE
DECREASE
USE INCREASE OR DECREASE KEYS
TO ADJUST SETTING
INCREASE
DECREASE
PRESS RESET OR WAIT 4 SECONDS
TO RESTORE OLD SETTING
OR
PRESS STORE TO SAVE
THE NEW SETTING
STORE
RESET
rE
PRESS RELAY ON SET POINT AGAIN TO CONFIRM
YOU WANT TO CHANGE THE AUTO SETTING
RELAY ON
SET
POINT

Honeywell 800 Series Specifications

General

Brand	Honeywell
Model	800 Series
Category	Barcode Reader
Language	English