Honeywell ADEMCO LYNXR - Aux Function; Defining the AUX Function; Performing the AUX Function

– 25 –
86(5)81&7,216
$8;)XQFWLRQ
*HQHUDO,QIRUPDWLRQ
The
AUX
key may have been programmed to either perform a predefined function or to send a preset
message to a pager/”Follow Me” system phone number (see Pager Feature section for pager operation
or the Follow Me Announcement Feature section for “Follow Me” operation). Ask your installer which
function has been assigned for your system.
$8;
Key:
35('(),1(' )81&7,21 3$*,1* )81&7,21 )2//2: 0( 92,&( 0(66$*(
If programmed for the AUX function, you can use the
$8;
key to activate a string of up to 20
keystrokes that have been stored in the system’s memory. Typical functions include:
• Seldom used but repeatable sequences
• Arming sequences that involve bypassing zones before arming
• Device activation sequences
Defining the AUX Function
The system must be disarmed before defining a function.
1. Enter
 )81&7,21  $8; KROG GRZQ DW OHDVW  VHFRQGV XQWLO  EHHSV VRXQG
0DVWHU XVHU FRGH
2. Press the desired command sequence, up to 20 keystrokes. Press the
$8;
key between each
command in the sequence.
3. Press the
$8;
key twice to end the definition.
For example, to bypass Zones 10 and 11 and arm AWAY with NO DELAY, enter the following string:
 )81&7,21  $8;  >@  >@  >@  $8;  $:$<  >@  $8;  $8;
0DVWHU XVHU FRGH
Note that the
$8;
key is included in the 20 keystroke maximum.
3HUIRUPLQJWKH$8;IXQFWLRQ
Press and hold down the
$8;
key (hold down at least 2 seconds until 4 beeps sound), then enter
7KH GHILQHG IXQFWLRQ ZLOO EHJLQ
<RXU XVHU FRGH