Honeywell ADEMCO LYNXR - Day; Year

– 27 –
86(5)81&7,216
&ORFN&DOHQGDU
5. The system will announce, “Enter two-digit day press ADD to accept, ESCAPE to quit”.
Day

(The current day of the month will display.)
Enter the 2-digit day of the month (i.e., 01-31).
Press [ADD] to accept the entry and continue to the year setting.
Press [ESCAPE] to back up to Month selection.
6. The system will announce, “Enter two-digit year press ADD to accept, ESCAPE to quit”.
Year 
(The current year will be displayed.)
Enter the last two digits of the year (i.e., 00-99).
Press [ADD] to accept the entry and exit Clock-Setting mode (keypad beeps 4 times).
Press [ESCAPE] to back up to Day selection.