Honeywell AreaRAE Pro - Page 41

AreaRAE Plus & AreaRAE Pro User’s Guide
41
Depending on the installed sensors, standard available measurement units include:
Abbreviation
Unit
Sensor
Type
ppm,ppb
parts per million, parts per billion
PID for VOC
mg/m3, ug/m3
milligrams per cubic meter, micrograms per cubic
meter
PID for VOC
ppm
parts per million
EC
mg/m3
milligrams per cubic meter
EC
μrem/h, mrem/h
microrems and millirems per hour
Gamma
μSv/h, mSv/h
microSieverts and milliSieverts per hour
Gamma
μR/h, mR/h
microRoentgens and milliRoentgens per hour
Gamma
μGy/h, mGy/h
microGrays and milliGrays per hour
Gamma
ppm
parts per million
CO
2
VOL
Volume
CO
2
ºF
Fahrenheit degrees
Temperature
ºC
Celsius degrees
Temperature
m/s
meter per second
Wind speed
MPH
mile per hour
Wind speed
Here is an example of the menu hierarchy (select the sensor type and then the measurement unit):
Duplicated Sensor
If there is sensor duplication (for example, two PID sensors for VOC), then the “Duplicated Sensor”
menu item is shown. You can select which of the duplicated sensors to make active. The instrument does
not support duplicate sensors.