Honeywell AreaRAE Pro - Configuration and User Modes; Programming Mode Access

AreaRAE Plus & AreaRAE Pro User’s Guide
51
10. It is recommended that you select “Use DHCP” to dynamically set up the correct settings. If you
must use a Static IP Address (many corporate enterprises require it), check with your I.T.
administrator.
11. Settings for “Security Mode,” “Security Key,” and “SSID” must match the settings on the router
associated with the PC or server running ProRAE Guardian.
12. Settings for “Server IP” and “Server Port” must match those of the PC or server running ProRAE
Guardian.