AreaRAE Plus & AreaRAE Pro User’s Guide
91
8. Replace the cover by tilting it so that the two tabs match the slots in the instrument and then
lowering it into place.
9. Replace the two Philips screws.
10. Slide a new battery into place.
11. Tighten the four screws.
IMPORTANT!
Alkaline batteries cannot be recharged. The instrument’s internal circuit detects alkaline battery pack and
will not allow recharging. If you try to charge alkaline batteries installed in the instrument, the display
does not show charging, indicating that it will not charge them.
Do not mix old and new batteries or batteries from different manufacturers.
Note: When replacing alkaline batteries, properly dispose of old ones.
To Next Page
Loading...
