Honeywell BK-G10MT User Manual

➔ www.docuthek.com
D GB F NL I SK RUS E RORO SRBSRB SRBCZ P
© 2018 Elster GmbH · Edition 01.18
Safety
Please read and keep in a safe place
Please read through these instructions
carefully before installing or operating. Following the
installation, pass the instructions on to the opera-
tor. This unit must be installed and commissioned
in accordance with the regulations and standards
in force. These instructions can also be found at
www.docuthek.com.
Explanation of symbols
• ,  ,  ,  ... = Action
▷ = Instruction
Liability
We will not be held liable for damage resulting from
non-observance of the instructions and non-com-
pliant use.
Safety instructions
Information that is relevant for safety is indicated in
the instructions as follows:
DANGER
Indicates potentially fatal situations.
WARNING
Indicates possible danger to life and limb.
CAUTION
Indicates possible material damage.
All interventions may only be carried out by qualified
gas technicians. Electrical interventions may only be
carried out by qualified electricians.
Conversion, spare parts
All technical changes are prohibited. Only use OEM
spare parts.
Changes to edition 07.7
The following chapters have been changed:
– Checking the usage
– Commissioning
– Accessories
– Technical data
– Declarations of conformity
– ATEX legend
– Logistics
Contents
Operating instructions
D
GB
F
NL
I
SK
RUS
E
RO
SRB
GB-1
1000063767-002-20
Translation from the German
Safety
Contents
Diaphragm gas meters
BK-G.6 to BK-G5
Diaphragm gas meters
BK-G.6 to BK-G5 .....................
Contents ..............................
Safety.................................
Checking the usage .....................
Diaphragm gas meters BK-G1.6 to G25 ......2
BK with integrated “Smart Valve” ............2
Type code .............................2
Part designations ........................2
Type label/Index plate.....................2
ATEX identification .......................3
Installation ............................4
Temperature test point ..................5
Pressure test point on housing (optional) ...5
Connecting the piping ....................6
Pressure test point on outlet connector
(optional) ..............................6
Opening the test nipple ...................6
Closing the test nipple ....................6
Tightness test ..........................6
Commissioning.........................7
Maintenance/Removal...................8
Accessories ...........................8
Technical data .........................9
Declarations of conformity ..............0
ATEX legend ..........................14
Logistics .............................4
Contact ..............................4
03250886

Honeywell BK-G10MT Specifications

General

Brand	Honeywell
Model	BK-G10MT
Category	Measuring Instruments
Language	English

Summary

Safety Information and Precautions

Symbols, Warnings, and Cautions

Explanation of symbols used, DANGER, WARNING, and CAUTION alerts for potential hazards.

Checking the Usage and Product Identification

Product Description BK-G1.6 to G25

Potentially Explosive Atmospheres

Guidance for meters suitable for operation in potentially explosive atmospheres.

ATEX Identification and Specifics

ATEX Identification for BK-G..M/C/MT/CT Models

Details ATEX identification for various BK gas meter models.

ATEX Identification for RFID Models

ATEX identification for models equipped with an RFID passive tag.

ATEX Identification for BK-G..A/AT Models

Details ATEX identification for BK-G..A and BK-G..AT gas meters.

Installation Procedures and Requirements

Installation Safety Warnings

Critical warnings to prevent damage to persons or meters during installation and operation.

Key Installation Parameters

Integrated Valve Installation

Installation Details and Precautions

Regulatory and Personnel Requirements

Adherence to national regulations and qualifications for personnel in hazardous areas.

Electrical Safety in Hazardous Areas

Requirements for equipotential bonding and protection from falling parts.

Installation Practices and Clearance

Pulse Transmitter Installation

Test Points and Piping Connection

Connecting the Piping Safety

Critical warnings for ensuring gas meter tightness and proper piping connection.

Piping Installation and Material Specs

Tightness Test Procedures

Checks for leaks before installation and during testing, including valve status.

Commissioning and Interfaces

Commissioning Steps

BK-G..M with Mechanical Index

Safety for Pulse Transmitter Connections

Critical safety instructions for meters with pulse transmitters.

BK-G..A with Absolute ENCODER

BK-G..E/B with Electronic Index

BK-G... with RFID Passive Tag

Safety for RFID Tag Usage

Warning regarding transmission capacity limits for RFID readers.

Integrated Valve Operation

Maintenance, Removal, and Accessories

Maintenance Procedures

Safety During Removal and Cleaning

Warnings about residual gas, explosion hazards, and cleaning in explosive areas.

Recommended Accessories

Technical Data Specifications

General Gas Meter Specifications

Explosion Protection Data

Specific parameters for meters with explosion protection, including temperature limits.

Pulse Transmitter Interface Parameters

Interface parameters for BK-G..M/C/MT/CT models with IN-Z6x pulse transmitters.

ENCODER Interface Parameters

Interface parameters for BK-G..A/AT models with Absolute ENCODER.

Integrated Valve Data