Honeywell C7061A1020 Product Handbook

1 EN1C-0015SZ20 R0602
C7061 A/F
DYNAMIC SELF CHECK ULTRAVIOLET FLAME DETECTOR
APPLICATION
The C7061A is a dynamic self-checking flame detector for
sensing the ultraviolet radiation generated by the combustion
of gas, oil, or other fuels.
This flame detector is available in two versions:
model C7061A for use in Standard applications, and model
C7061F for use in installations requiring explosion-proof
packaging. The flame detector is designed for use with either,
R7061 Dynamic Self-Check Ultraviolet amplifier and
• R4348 Flame Switch or,
or with,
R7861A Dynamic Self-Check Ultraviolet amplifier and,
• 7800 SERIES Burner Programmers
These configurations provide a closed-loop, self-checking
circuit which insures the integrity of both amplifier and flame
detector. Improper response simulated flame loss results in
a safety shutdown and/or alarm.
CONTENTS
GENERAL
Description .................................................................... 2
Features ......................................................................... 2
Orderdering information ................................................ 2
TECHNICAL DATA
Specification .................................................................. 3
Standards and approvals .............................................. 4
Replacement parts and accessories ............................. 4
Dimensional drawing ..................................................... 5
INSTALLATION AND OPERATION
Planning the installation ................................................ 6
Installation ..................................................................... 8
Wiring .......................................................................... 10
Adjustement and checkout ......................................... 12
VARIOUS
Troubleshooting .......................................................... 13
Service ......................................................................... 14
model C7061F
model C7061A
PRODUCT HANDBOOK

Honeywell C7061A1020 Specifications

General

Voltage	24 VDC
Flame Detector Type	Ultraviolet (UV)
Mounting	Surface mount
Electrical Connections	Terminal block
Approvals	UL, FM, CE
Type	Flame Detector
Current Draw (Alarm)	35 mA
Humidity Range	0 to 95% RH, non-condensing
Application	Flame detection in industrial applications
Compatibility	Honeywell
Temperature Range	-40 to 185°F (-40 to 85°C)